The UV Integrator
159 is a small, self-contained, high quality UV measuring instrument.
It is designed to measure and display peak UV intensity in mW/cm2,
UV dosage in mJ/cm2 and temperature in the UV curing process.
In the standard version
it is equipped with one UV sensor and one temperature sensor
for the measuring of:
UVA 250 - 410 nm
Temp 32 to 230¡ã F / 0 to 110¡ã C
With this total UV band peak energy and dose measuring, most
of the measuring requirements of UV curing applications can
be covered.
Due to its UV sensor and the integrated microprocessor the UV
Integrator 159 can measure and display the peak UV-intensity
of the total UV spectrum (mW/cm2).
Additionally, this UV-measuring instrument is calculating the
UV-dosage (mJ/cm2) of the UV energy supplied during the time
of exposure of one measuring cycle. The UV-dosage is calculated
as the total Integral of UV-dosage over the full UV spectral
bands.
An extra sensor is measuring temperatures from 32 to 230¡ã F
/ 0 to 115¡ã C.
The sensors are on
the back of the unit which also serves as a heat shield. After
completion of the measuring cycle the measuring results can
be scrolled through on the built in 2 x 16 digit LCD display.
A special AUTO-OFF
feature that turns off the unit automatically after one minute
serves as energy saving and extension of the battery service
life.
